All models of Servo Slides with Linear Guides and Ball Screw marketed by 4ManPro^© (Elements For Manufacturing Processes) a Hann Kuen Machinery & Hardware, Co., Ltd BRANCH OFFICE, are equipped with Delta Electronics® Brand Servo Motors, providing us with a product with excellent quality and performance.

The RHE Series Linear Motion Servo Slide models are equipped with precision ground rectangular guides.

These slides are used where high speed, damping and rigidity are required during machining. The surface of the rectangular guides and wedges are ground and ground, the contact surface of the saddle is coated with Turcite^®, which reduces friction. This series of Servo Slides has 100 mm & 200 mm strokes. Also, the BALL SCREW is located at a shorter distance from the floor at the bottom facilitating its use in machining parts. However, its load capacity is lower than that of the BS Series elements.

The SERVO SLIDES with LINEAR GUIDEWAYS & BALL SCREW that make up this section of elements is composed of the following devices:

ELEMENTS

RHE SERIES

• RHE120-320L
  • MAXIMUM SLIDE STROKE:
    • 100.00 mm
  • MAXIMUM WORKING LOAD:
    • 80.00 Kg
  • BALL SCREW TYPE:
    • Ø16 x 5 x C7
  • SLIDING TABLE DIMENSIONS:
    • 120.00 mm x 200.00 mm

• RHE150-320L
  • MAXIMUM SLIDE STROKE:
    • 410.00 mm
  • MAXIMUM WORKING LOAD:
    • 250.00 Kg
  • BALL SCREW TYPE:
    • Ø25 x 5
  • SLIDING TABLE DIMENSIONS:
    • 250.00 mm x 350.00 mm

• RHE200-420L
  • MAXIMUM SLIDE STROKE:
    • 650.00 mm
  • MAXIMUM WORKING LOAD:
    • 250.00 Kg
  • BALL SCREW TYPE:
    • Ø25 x 5
  • SLIDING TABLE DIMENSIONS:
    • 250.00 mm x 350.00 mm

• RHE200-520L
  • MAXIMUM SLIDE STROKE:
    • 410.00 mm
  • MAXIMUM WORKING LOAD:
    • 350.00 Kg
  • BALL SCREW TYPE:
    • Ø25 x 5
  • SLIDING TABLE DIMENSIONS:
    • 300.00 mm x 350.00 mm

• RHE250-420L
  • MAXIMUM SLIDE STROKE:
    • 100.00 mm
  • MAXIMUM WORKING LOAD:
    • 250.00 Kg
  • BALL SCREW TYPE:
    • Ø25 x 5 x C7
  • SLIDING TABLE DIMENSIONS:
    • 250.00 mm x 350.00 mm

• RHE250-520L
  • MAXIMUM SLIDE STROKE:
    • 200.00 mm
  • MAXIMUM WORKING LOAD:
    • 250.00 Kg
  • BALL SCREW TYPE:
    • Ø25 x 5 x C7
  • SLIDING TABLE DIMENSIONS:
    • 250.00 mm x 350.00 mm

• RHE300-420L
  • MAXIMUM SLIDE STROKE:
    • 100.00 mm
  • MAXIMUM WORKING LOAD:
    • 350.00 Kg
  • BALL SCREW TYPE:
    • Ø25 x 5 x C7
  • SLIDING TABLE DIMENSIONS:
    • 300.00 mm x 350.00 mm

• RHE300-520L
  • MAXIMUM SLIDE STROKE:
    • 200.00 mm
  • MAXIMUM WORKING LOAD:
    • 350.00 Kg
  • BALL SCREW TYPE:
    • Ø25 x 5 x C7
  • SLIDING TABLE DIMENSIONS:
    • 300.00 mm x 350.00 mm